Zinc Nickel Plating Kit

£76.00£129.00

Clear
SKU: N/A Categories: ,

Product Description

 Our Zinc Nickel Plating  kit  is ideal for any marine, classic car or motorbike restoration project, where plating is required to finish, protect and enhance components. In particular, in marine environment the passivated zinc nickel plate provides superior protecion over passivated zinc. The kit is ideal for plating items such as nuts, bolts and brackets. Although the zinc plating kit is primarily used on steel parts, it can also be used on iron, brass and copper.

The zinc nickel plating kit is based on the commercial electroplating system we use for our own restoration projects here at Classic Plating. The  zinc nickel plating kit gives professional results for the DIY enthusiast. These kits make it practical to restore and protect the myriad of smaller parts that are often left unloved during a restoration project because of the expense involved.

With care, and advice where needed, any DIY enthusiast or restorer using one of our kits with the comprehensive instruction manual, can produce quality results.

Zinc Nickel Alloy Plating Kit Contents

Standard Kit: 5 LitresLarge Kit: 9 LitresProfessional Kit: 15 Litres
High quality plating chemicals, enough to make 9 litres of zinc\nickel electrolyte

Alkaline Degreaser 250g

Pre-plating Acid Pickle. 250g

Starter and brightener chemicals

High purity zinc anodes 225g, will plate 34,000sq cm

High purity nickel anodes 75g

Yellow/Gold passivate (makes up to 9 litres)

Blue/Clear passivate (makes up to 9 litres)

Nitric acid dip

5 litre tank

Wire connector pack.

Crocodile clips

Gloves

Safety Goggles

Dust mask

Variable Current Controller for use with 12volt supply (e.g. 12 volt car battery) details in user guide

Comprehensive user guide




High quality plating chemicals, enough to make 15 litres of zinc\nickel electrolyte

Alkaline Degreaser 250g

Pre-plating Acid Pickle. 500g

Starter and brightener chemicals

High purity zinc anodes 300g, will plate 34,000sq cm

High purity nickel anodes 75g

Yellow/Gold passivate (makes up to 9 litres)

Blue/Clear passivate (makes up to 9 litres)

Nitric acid dip

10 litre tank

Wire connector pack.

Crocodile clips

Gloves

Safety Goggles

Dust mask.

Variable Current Controller for use with 12volt supply (e.g. 12 volt car battery) details in user guide

Comprehensive user guide
High quality plating chemicals, enough to make 15 litres of zinc\nickel electrolyte

Alkaline Degreaser 500g

Pre-plating Acid Pickle. 500g

Starter and brightener chemicals

High purity zinc anodes 400g, will plate 44,000sq cm

High purity nickel anodes 100g

Yellow/Gold passivate (makes up to 9 litres)

Blue/Clear passivate (makes up to 9 litres)

Nitric acid dip

Multimeter

Air pump, air stone and tubing

Tank Heater

3 X 10 litre tank

2 X Wire connector pack

Crocodile clips

Gloves

Safety Goggles

Dust mask.

Variable Current Controller for use with 12volt supply (e.g. 12 volt car battery) details in user guide

Cleaning

The part to be plated must be spotless to get a good finish. Excessive rust, dirt and grease can be removed with a wire brush or by sand blasting. We have found electrolytic cleaning gives the best results.

After cleaning the part, the Alkaline Degreaser is used to clean the last traces of grease  and dirt while the Acid Pickle activates the surface ready for plating. Both are essential to prepare the surface prior to plating and can be used to remove rust. Further details are included in the Zinc Nickel Plating Kit manual.

Passivates

The zinc nickel plating kit also contains two passivates. Cadmium Yellow Gold and Blue Clear passivate.

Dip the part in a passivate solution for 30 seconds, immediately after plating for the desired finish and enhanced protection against corrosion.

Use the Yellow/Gold passivate for a gold finish with outstanding corrosion protection characteristics.

Use the Clear/Blue passivate for a bright silver finish or if left longer  for a blue sheen finish. Both finishes provide long lasting corrosion protection.

Black and Olive Drab passivates are available as optional extras.

General

Used with a metallic spray, this kit is ideal for plating non-metallic items (Baby’s first shoes are popular items for plating)

Value for money, high quality and economical, this kit comes with a comprehensive plating guide and safety instructions, containing all the information you will need to start plating your project. Our products are fully supported by a customer service technical helpline and email support.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…